Linux Mint

Install the latest Nvidia graphics drivers in Ubuntu or Linux Mint via PPA

​How to install Linux Mint on your Windows PC
Retrieved June 22, February 19, at After installing Mint 19 on my Sony Vaio, there was no wi-fi, sound or bluetooth!!!! Otherwise, this works perfectly with Mint In desperation have just downloaded Mint Thanks for showing how to use gparted to create the data partition.

Relevant Posts

How To Install VirtualBox in Linux Mint / Ubuntu Linux

Otherwise in Mint the file is read only and I don't know how to edit it and save it. Copy the following, change the name like you want it an add the word 'persistent' like below. I followed every step to the letter, except for the first partition I allocated mb instead of Everything else I did as instructed and my live usb stick boots and runs mighty fine, but nothing I customized, installed or configured was saved after I closed the first live session.

Otherwise is back to 4 GB casper file using either http: I am the author of Easy2Boot. Creating a separate partition with a volume name of casper-rw and using a boot parameter or 'persistent' works for The casper script in the initrd. There is no occurrence of 'persistence' being looked for in the script, so I guess it will just be ignored - you might as well use 'ignoreme'! A volume name of casper-rw is looked for in the startup script.

So it seems that the partition is being used and initialised by the casper script, but then something later fails. I can't believe that this has not been spotted and fixed by the developers??

At the time I wrote this, mb was plenty of space to unpack the boot image. You only need enough room for that. Then the rest of the space on your flash drive can be used for the casper-rw persistent partition. This is where any changes to the system or personal files will be stored. In desperation have just downloaded Mint I can now vouch for the fact that in Using 'persistent' it boots, I can make changes, exit, reboot and my changes are still there. So, the procedure works with V So, for sure something has changed as 'persistent' works perfectly with Very frustrated after spending several hours over two days trying to recreate my damaged Persistent Mint USB stick.

I cannot make it work on Mint 18 or Mint The only sure thing is that 'persistent' only gives an 'initramfs' error. The really odd thing is that my old stick Mint I know this because I saved both config files for future reference.

So, has something changed? The whole process seems very flakey with many people failing to achieve persistence and with various supposed 'fixes' being published, none of which has worked for me. Is it time to revisit this process? Tried for 3 days to get this to Boot Again using various software and suggestions. Back to windows again. For those who tried it with What seems to work though is I did that and had no problems initially, however, some days later there were some small issues freezing.

I am not sure if those issues were related to the update. I would have loved to get smaller distros like lubuntu to get to work, but after many days of trying and not succeeding, I give up. I would like to hear which other distro besides LM I am using Did anyone read "Space used to preserve files across reboots" ubuntu only.. I found it here:. Will creating it this way work for what I'm asking?? Everything working perfectly so far.

This worked only on BIOS. All notes below concerning the use of the word "persistence" are valid. But persistence does not work nevertheless. Use of the word "persistence" is any way necessary.

Next test will be to "install" Mint 18 or Ubuntu The tutorial works with Linux Mint The only "tweak" applied was to change "persistent" gives initramfs error to "persistence". I was just trying to make a persistent drive from a 64GB usb stick, and followed the instructions as well as this tip and some others to try to get it to work, but, despite booting fine, it is still not persistent and does not keep files between boots. I've tried this tutorial and suggestions in the comments for editing grub.

Indeed if "persistent" is written in the files mention above, the initramfs error occurs, if it's written "persistence" the error doesn't occur anymore. However there's persistence with the casper-rw file, but that's limited to 4GB. I tried the above procedure for the latest Linux Mint I boot through UEFI disabling secure boot and it boots successfully. However I'm not able to make persistence work.

The only change that I did from the above process is my casper-rw partition is ext4 and not ext2. Will that be a problem? Also is it required to set the boot partition label as 'Live'. HI I need help with this as well. I encountered the initramfs boot error issue, but managed to get past it by adding the word "persistence" after the "--" in the "syslinux.

I confirmed the word "persistent" causes the initramfs boot error issue in my case. My problem now is that I can boot successfully, but persistence is still not working yet. I confirmed on two separate sandisk flash drives with 16GB and 64GB capacity. Same behavior on both when I edit the files mentioned above. The same happened to me with mint Initramfs appears and I have no ideas what to do next. Hello guys, I went through the same problem and spent lot of times looking for a fix.

However i figured it out myself and it was just so easy than i expected. Tested with Linux Mint I've used unetbootin and the above tutorial to make a few sticks now as I get to know more about linux and design a few front-ends for different purposes i. I've noticed that the above method works for Mint, Ubuntu and a few other systems such as Porteus.

However, when I've tried to use it for Debian and Kali, it just doesn't seem to work even though the casper-rw file is still replaceable. Do you know why this is and whether there is any way around it? I'd like to be able to run a suse server from larger stick sticks with cloud networking for a web app project me and some freinds want to start but anticipate the same problem. Ive also noticed that Slax supports persistent booting without the casper-rw - what is the difference between that and the unetbootin persistent stick - I'm guessing its that Slax doesnt need ext 2 to write to but as I'm a noob I cant be sure.

What worked for me on the Debian based distro is naming the partition persistence and modifying the live. Here is the relevant section from live. I also installed this from a Debian Jessie box and had to copy libcom I'm having problems getting persistence to work currently on a Mint I've created the casper-rw partition and added persistent in syslinux.

If I exit out of the shell I get a kernel panic. At no point did I try using Unetbootin as I've had mixed success over the years and didn't feel it is necessary. Thanks for a great tutorial, my usb persistent drives work perfect. I have just one question. As you can probably imagine, sometimes it would be desirable to be able to run my pendrive through windows, for example if i'm in the local library or an internet cafe where I cant access the boot menu of the terminal I'm on. Is there a standalone app that I could place on the stich which would allow me to do this.

Such a thing would be worth its weight in gold for the utility it would grant a user. Thanks for an excellent tutorial. I have created a Zorin-OS persistent usb drive on my 16gb hp usb drive. The former not including the "persistent" keyword. Add that some way, either manually at boot time tested, it worked or by editing GRUB configurations or use the legacy loader.

Do you agree with this? Just wanted to thank you for the excellent tutorial! I wanted to set up a 64GB stick with Mint Here's how my process went: For some reason, that version of GParted wasn't completing the partitioning process properly.

So I tried the GParted on Kali which was a different version , and it worked perfectly. Then I used Unetbootin to put it on the stick. I believe that one poster was correct in that the second partition must be named "casper-rw" - I tried the casper-snapshot method, but it didn't work for me.

I basically followed this tutorial to the letter, except I used those tips about editing "syslinux. It's painfully slow mainly boot time, a full 5 minutes! I think I might use a smaller stick with Mint on it that's NOT persistent, just for sketching out ideas and saving docs etc to my local drive, and using the persistent one for my full dev environment.

Anyway, thank you for the tutorial, and thanks to the other posters for their great tips! I'll have to look into a better stick and do this again. I love your tutorial! It is simple and works great! I have discovered a few things not covered, probably because of when you wrote it compared to what is happening today August I'd like to share my discoveries in case they are useful.

The type and quality of the USB stick used is very important. Some generic USB sticks are really slow i. Microcenter generic brand is cheap, but slow so while some are great for storage, they aren't so good for a bootable Linux Mint distro. Ironically, it is cheaper than the Kingston at Amazon, as of this date. I assume a hardware issue?

As you must have figured out by now, Linux Mint "Rafaela" So, the live partition size - which you have as - won't work. I've seen some suggestions as high as 5GB, but I think that is over compensating.

I set my value to and it formatted and booted just great. I have since installed a bunch of additional software such as Audacity with no problems at all. I have several programs running under WINE and they've never done so well! Thanks for the instructions they did the trick. Still, I could use some feedback though: Did I do right or should I redo with some other space allocations? Is there a fix? Did I do something wrong?

My desktop computer has 4 GB ram sorry, cant remember the speed only that it is dual core and probably over 2. I like Linux Mint Still, your instructions were clear and easy to follow, thank you. It's a "hit or miss" kind of thing.

You can find them 32GB on Amazon for pretty cheap. Worked great as described with Linux Mint Also, used LesStrater comments about editing the syslinux. Run "mount" and notice that snapshot is saved Linerd Why the hell are you advising 1.

I know its freeware but this whole experience has wasted days of my precious live and still failed. It just consumes time and you end up giving up and going back to windows.

At the time this was written, the largest Mint ISO was 1. Rather than being nasty, why don't you try being a little more cordial to people that offer free tutorials and free software? You might find them a little more willing to help you if you're being nice. I highly doubt the UNetbootin devs are following this post, so your suggestion will likely never reach them through this blog.

In my opinion this hack with UNetbootin shouldn't be necessary. I have also been successful doing the same setup using http: I have successfully managed to make a live USB stick with Mint To do this you need to do the following steps 1. You should now be able to see Mint loading and executing in memory as if you had no persistent enabled. Make changes to the environment, upgrade few files and then reboot.

Thank you Linerd for this brilliant tutorial! Thank you gvelim for your most helpful comment! However, it did not work for me Mint I found this article yesterday, as a new user of Linux wanting such persistence for Mint What worked for me was changing the value of the first GParted new partition from 1. Thanks very much indeed for the original article, hope my input adds a good option to try for others having trouble.

I followed the directions as they are except for using a 5GB first partition just because I didn't want to run into problems. Everything is working fine. I receive a out of space message Is it rrealy the 1st partiton Mb we chooe in Unetbootin?

Yes, you want to choose your smaller partition. What value did you enter for the "Space used to preserve files across reboots Ubuntu only: You want to enter a small amount there because it will eat up space in the first partition. As of this writing, the Linux Mint software manager will install version 5.

If we want or need the latest and greatest version of Virtualbox, we will only get it through the VirtualBox website. Here we will show how it works in Linux Mint. A quick way to do so is by using the nano terminal text editor. On the VirtualBox download page, we will find the proper. The package installer might need to install some additional packages. You can like our Facebook page , share this post with your friends, and select our affiliate links for your purchases on Amazon.

If you prefer your purchases from China, we are affiliated with the largest international e-shops:. He loves good beer, having more RAM on his PC that he will ever, ever need, and writing for a living.

Just reboot and try again. Linux Mint tips and tricks. Then, select "Start Linux Mint" from the first menu. And, from there, you'll be running Linux Mint. Some Nvidia graphics cards don't work well with Mint's open-source driver. If Linux Mint freezes during boot, use the "nomodeset" boot option. You set this to the Start Linux Mint option and press 'e' to modify the boot options. Then, replace "quiet splash" with "nomodeset" and press F10 to boot. Mint will run slower this way, but it will boot and run.

If you decide to install Mint, you can permanently fix the problem with the following steps:. So far, you haven't installed anything on your PC, but you will be running Mint. Use this opportunity to play with Mint to see if you like it. Using a DVD drive Mint will run slowly, but it will run quickly enough to give you an idea of what it's like to use Mint.

With a USB stick, it runs fast enough to give you a good notion of what working with Mint is like. First, make a complete backup of your Windows system. Installing Linux in the way I'm going to describe shouldn't hurt your Windows setup at all, but why take any chances?

What's the most popular Linux of them all? It can still be an annoyance, but Ubuntu and Mint have made booting and installing with Secure Boot system a non-issue. All pre-built binaries intended to be loaded as part of the boot process, with the exception of the initrd image, are signed by Canonical's UEFI certificate, which is implicitly trusted by being embedded in the Microsoft signed shim loader.

There are many ways to switch Secure Boot off. All involve going to the UEFI control panel during the boot process and switching it off.

Next, make sure your PC is plugged in. The last thing you want is to run out of battery power during an operating system install! You'll also need an internet connection and about 8GBs of free drive space. That done, reboot into Linux again. Once you have the Mint display up, one of your icon choices on the left will be to install Mint. Double-click it and you'll be on your way.

The most popular Linux desktop programs are You'll need to walk your way through several menu choices. Most of these decisions will be easy. For example, the language you want Mint to use and your time zone. The one critical choice will be how to partition your hard drive. The Internet of Things is the new frontier. However, generations of ERP systems were not designed to handle global networks of sensors and devices. Partitioning a hard drive can become very complicated, but fortunately, there's an easy choice that will let you dual-boot both Windows and Mint.

What you'll need